*Universal Garage Door Gate Duplicate Duplicator Clone Wireless Remote Control Key
*With this replacement remote key you can clone all 433MHz fixed code key fobs based on supported IC
*The 4 buttons could respectively copy 4 different types of chips, That is a remote control can operate 4 different types of facilities
*Faster copy data speed, not easy losing code, far distance
*100% brand new and high quality
*Working voltage: DC12V
*Working current: <25mA
*Working Frequency: 315MHZ/433MHZ
*Transmit power: +13dbm
*Remote control distance: 100M (Approx.)
*Modulation mode: ASK
*Code mode: learning code
*Working environment: -15*70degree Celsius
*Power Supply: 12V 23A button cell (built-in)
How to Use:
1.Chips could be copied
2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200\HCS201(part code),HCS300\HCS301(partial code)
2.Code clearing method:
Press the unlock button and lock button at the same time(some shells are the up button and down button), after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.
3. Copy method
One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control with smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.
(Attention: Your original remote control must be able to work and the same as our remote control frequency)
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.