It can be used in both heating and cooling system. It has high temperature alarm function.
Temperature range: -30°C-500°C
Temperature control accuracy: 1°C
Refresh frequency: 2 times per second
Power: 12V, 24V, 220V (optional)
Sensor: K type thermocouple with 1m cable
Output type: 1 set of 10A temperature control output + 1 set of 10A high temperature alarm output.
Enviornmental requirement: -30~60°C, humidity 20%~85%
Dimension of installation hole: 70.5*29mm
Package includes: a thermostat + a 1 meter cable length thread sensor
1. Use the same power to supply both load and thermostat.
2. Supply load and thermostat with seperate power.
1. Wiring correctly per instruction. Never overload or use voltage higher than requirement.
2. Set mode. Keep press down “Set” key for 5 seconds. It’ll display “P0”. Press “Set” again to choose mode you want. H for heating mode, C for cooling mode.
3. Set temperature. Press “Set” key. The screen will start blinking. Press up and down key to set temperature you want.
4. “Rst” is a confirm key. Keep pressing “Rst’ to turn on / off the thermostat.
Function of each parameter:
Keep press down “Set” key for 5 seconds to set parameter. Use up and down to switch P0 … P4. Press “Rst” for confirmation.
|P1||Set temperature difference||1-100||2|
|P2||Temperature Align||-10 – +10||0.0|
|P3||High temperature alarm||-29 – 999||OFF|
For orders exceeding $5, we’ll use registered air mail free shipping.You can track it all the way till receiving it. But for orders lower than $5, we’ll use economic shipping method, except below countries, Russian Federation, Spain, Ukraine and Belarus. You can track it, only when it’s in China.
In order to have tracking information all the way to your place, if possible, please try to make your orders exceeding $5. For customers from country in the exception list, please try to make your orders exceeding $2.